Easyfix CS is a custom-made edging for free-form shapes, extremely flexible and adaptable. With folded edges for safety and long anchoring pins for extra stability.
Easyfix CS is extremely flexible and adapts to any shape in your project: straight lines, smooth curves and irregular routes. You don’t need separate corner pieces and can create any floor plan directly on the construction site, using one and the same product.
You can easily drive in the edging with a hammer. Position the adjustable pockets as desired depending on the route, and the long anchoring stakes with high impact resistance ensure a firm fixation. This way you can work quickly and achieve a clean, straight line.
The bent-over top edge with no sharp edges makes Easyfix CS safe to use: you can walk over it barefoot, making the edge finish child- and pet-friendly. After installation, the fastening material remains largely out of sight for a neat finish.
A user-friendly, flexible steel edging for the sleek finishing of paths, terraces, borders, and lawns.
Easyfix CS is suitable for all areas where no traffic passes:
Easyfix CS is available in two steel versions, each in a height of 100 or 150 mm:
Depending on the selected version, the movable pockets are available in a matching colour (grey or brown).
Easyfix CS is available in two steel versions, each in a height of 100 or 150 mm:
Depending on the selected version, the movable pockets are available in a matching colour (grey or brown).
You can install Easyfix CS quickly and easily with a hammer, without any special tools.
Step 1 — Mark out the layout
Determine the layout of your edging. Easyfix CS follows both straight lines and smooth curves, so you can shape it freely.
Step 2 — Install the border
Place the Easyfix Border along the layout and hammer it into the ground to the desired height.
Step 3 — Position the pockets
Slide the pockets into place, at random along the layout, wherever you need extra anchoring.
Step 4 — Anchor
Drive the long anchoring pins through the pockets into the ground for a solid, impact-resistant fixing.
Step 5 — Finish
Finish the adjoining surfaces. Thanks to the bent top edge and the minimally visible fixing, you get a neat, safe finish.
Easyfix CS is available in galvanised and corten steel, each in a height of 100 or 150 mm. The tables below provide the general specifications and the dimensions per version.
Easyfix CS consists of three components that together form a complete installation:
Per pack you get 6 edgings of 240 cm, 18 pockets and 18 anchoring pins, together good for nearly 15 linear metres of edge restraint.
| Property | Value |
|---|---|
| Material | Galvanized steel (0.8 mm) and corten steel (1 mm) |
| Length | 240 cm |
| Heights | 100 mm of 150 mm |
| Height anchor pins | 34 cm |
| Parts | 6 tarpaulins, 18 pockets, 18 anchoring pegs |
| Yield per package | Approximately 15 linear metres |
| Application | Zones where driving is not allowed |
| Top edge | Bent, without sharp edges |
| Color pockets | Grey or brown |
You can shorten the Easyfix with a cutting disc (cut a mitre). To make a corner, cut all the way through the folded edges, lightly score the border itself, and then you can manually bend the border to a 90° angle.
The RAL colour used is 9005 (jet black).