• Shadow on an asphalt path along a grassy edge with a few leaves.
  • Concrete footpath next to grass with leaves and moss along the edge
  • Rust-brown metal lawn edging along a winding garden path under construction
  • Close-up of a rusty metal edge next to gravel and soil
  • Rusty metal plate with screws on asphalt, with a small cylindrical cap on it
  • Winding park path with lots of greenery and trees, building with graffiti on the left

CORE Datum Edge powered by ECCO is the robust edging solution for commercial landscaping projects in straight lines, corners and curved shapes. With DatumLock™ locking system.

  • Accurately up to date thanks to DatumLock™

    With the patented DatumLock™ locking system, you slide the edging over the pins to the correct height and lock it with the DatumLock™ screws. This creates a level reference plane and delivers a clean line, even on uneven ground.

  • An edging for straight lines, curves and corners

    CORE Datum Edge powered by ECCO creates straight lines, curved shapes and corners with one and the same product. You don’t need to keep separate corner pieces or profiles in stock and can realise any floor plan directly on site. The fastening material remains completely concealed for a neat finish.

  • Suitable for any surface

    The 3 mm thick steel and the long 480 mm anchoring pins ensure a secure anchorage, even in difficult soil. Available in galvanized steel, mild steel and corten steel, each partly recycled and 100% recyclable. 

The benefits of CORE Datum Edge powered by ECCO

A robust steel edging for heavy-duty edge finishing of lawns, paving, driveways and commercial landscaping projects. 

  • Robust edging for heavy-duty edge finishing
  • Designed for commercial landscaping projects
  • Suitable for difficult ground conditions and demanding environments
  • Precisely height-adjustable thanks to the patented DatumLock™ system
  • Sturdy fastening thanks to long anchoring pins (480 mm)
  • Concealed fastening material for an aesthetic finish
  • Suitable for corners, straight and curved shapes
  • Easy to cut to size yourself
  • No preformed pens, therefore versatile in use
  • Available in 3 finishes: galvanized steel, mild steel and corten steel
  • Partly recycled and 100% recyclable
Applications

What do I use CORE Datum Edge powered by ECCO for?

CORE Datum Edge powered by ECCO is designed for edging demanding commercial projects: 

  • Lawns and lawn borders 
  • Paving 
  • Driveways 
  • Commercial landscaping projects 
  • Separation between hardscape and greenery 
  • Metal corner bracket bolted to a wooden beam, above soil and grass
  • Corten steel border edging with garden herbs and gravel path
  • Empty, bordered garden bed with loose soil and flowering plants in the background
  • Modern home with warmly lit windows along a winding garden path at dusk
  • Winding sandy path under construction with metal edging in a park
  • Winding gravel path through a green garden in warm evening light
  • Three wooden boards in red, grey and black on green grass.
FINISHING

Available in 3 finishes

CORE Datum Edge powered by ECCO is available in three steel finishes, each with a height of 150 mm.

  • Soft steel

    For extra flexibility when forming bends
  • Witte metalen plaat met scharnieren en schroeven aan de bovenkant

    Galvanized steel

    For maximum robustness and corrosion protection
  • Bruine plank met donkere strepen boven witte rechthoek en zwarte balk

    Corten steel

    For a natural, rust-brown look that evolves over time

How do you install CORE Datum Edge powered by ECCO?

Required tools 

  • Mason’s line 
  • Tape measure 
  • Hammer 
  • Wooden block 
  • Impact screwdriver 

 

Step-by-step plan 

Step 1 — Preparation 

Clear the area thoroughly and prepare the sub-base to create a stable foundation. If the soil is hard, loosen it to make installation easier. 

Step 2 — Installation 

Place CORE Datum Edge into the ground. Drive the edging in using a wooden block and a hammer. The block protects the top edge and makes the work safer. 

Step 3 — Anchoring 

Slide the supplied anchoring pins through the sleeves and drive them down for extra reinforcement. Position the sleeves on the least visible side. For curved shapes, use the pins to create anchor points along the desired path. 

Step 4 — Adjusting height 

Slide the edging up or down over the pins until it is level and at the correct height. Lock it with the DatumLock™ screws once the desired height has been reached. 

Step 5 — Connection 

Align the next length with the section already installed and connect both using the supplied connection plates. Tighten the bolts and repeat for each subsequent length. 

Step 6 — Finishing 

Finish the surrounding surfaces and arrange the landscape as desired. The end result is a clean, neat finish for your garden edging.

Technical specifications CORE Datum Edge powered by ECCO

CORE Datum Edge powered by ECCO is made from 3 mm steel and is supplied with anchoring pins, connecting plates and screws. The values below apply as a reference for the three finishes. 

Download the technical datasheet
Download the installation sheet
Property Value
Performances Galvanised steel, mild steel, corten steel
Height 150 mm
Length 2.2 metres
Material thickness 3 mm
Weight 10 kg each
Quantity per package 2 lengths (4.4 metres)
Anchoring pins 480 mm
Confirmation Anchoring pins, connecting plates and screws
Locking Patented DateLock™ system (height adjustable)
Shapes Straight lines, curved shapes and angles
Recyclability Partly recycled / 100% recyclable
FAQ

Frequently asked questions

  • What is the best way to create a curved shape with CORE Edge?

    That depends on how tight the bend needs to be.

    Tight bend

    Bend each edging separately around a suitable cylindrical object, such as a bucket filled with soil or a round post.

    Smooth bend

    You have two options, depending on how many people are on site.

    • Working alone: bend each piece slightly by hand and connect the pieces one by one.
    • With multiple people: first connect the desired number of edgings together — make sure the double locking tabs click firmly into place. Start at one end and gradually tap the edgings into the ground, while your colleagues hold the bend in place.

  • What is the best way to install CORE Edge in a hard surface?

    The anchoring pegs of CORE Edge are extremely durable and can be driven into most firm subsoils using a wooden mallet or a wooden block. If the subsoil is particularly hard, it is recommended to loosen it first with a digging fork or pickaxe. Once the edging is in place, press the soil firmly against it by lightly tamping it down. If the edging needs to protrude above ground level, for example with a raised border, the galvanized stabilizing pegs may be needed for extra support.

  • What is the best way to install CORE Edge in very soft ground?

    The preformed anchoring pins can easily be tapped into soft ground. It is advisable to place a piece of brick or a flat stone under the edging at regular intervals to prevent the edging from sinking under direct pressure. An alternative is to support the edging with a concrete backing, placed just below the top edge. When the edging needs to protrude above ground level, for example in a raised border, the galvanised stabilisation pins provide extra support and long-term stability.