A-Joint® Repair is the 2-component repair mortar for restoring damaged or washed-out joints in existing paving. It also fills shallow joints from 10 mm and is trafficable again after 24 hours.
During repairs, routing out existing joints to 25 or 30 mm is often not feasible: too time-consuming, too expensive or technically impossible with delicate natural stone. A-Joint® Repair powered by ECCO works from a joint depth of 10 mm, allowing you to carry out much more shallow repairs. The fine sand structure ensures strong adhesion to the joint sides, even with narrow joints from 3 mm.
A repair joint is only durable if it bonds to the existing joint. A-Joint® Repair powered by ECCO is built on that bonding strength: the epoxy resin mortar bonds old and new joint material into one solid whole. Ideal for repairing frost and thaw damage where the outer centimetres have been washed out but the underlying joint is still intact.
For public roads, city squares and car parks, every day the area is closed counts. A‑Joint® Repair powered by ECCO is walkable after 6 hours and drivable after 24 hours at 20°C. With a load capacity of up to 25 tonnes and resistant to street sweepers and high‑pressure cleaners, it’s suitable for the heaviest loads in public spaces.
A 2-component pointing mortar that repairs washed-out and crumbling joints with strong adhesion to the existing joint, in shallow joints from 10 mm.
Would you like to use A-Joint® Repair powered by ECCO in your project, but don’t want to be left with surplus or have to reorder? Calculate exactly how much you need in advance with this handy product calculator.
A-Joint® Repair powered by ECCO is used to repair existing, damaged joints, not to point new paving. It is a 2-component (epoxy resin) repair mortar that bonds to the old joint.
What you use it for:
Each product is tested for water permeability, compressive strength and durability before it goes on the market. The values in the table below serve as a reference; actual performance may vary depending on the substrate and application.
| Property | Value |
|---|---|
| System | 2-component joint mortar (epoxy resin mortar) |
| Add width | From 3 mm onwards |
| Insertion depth | From 10 mm |
| Tax | Heavy road tax up to 25 tonnes |
| Processing temperature | > 0°C and 30°C |
| Processing time at 20°C | Approx. 20–30 minutes |
| Load capacity at 20°C | Walkable after 6 hours, drivable after 24 hours |
| Delivery method | PCR bucket of 25 kg |
| Shelf life | 24 months in original packaging, store in a dry, frost-free place, protect from direct sunlight |
| Compressive strength | 32 N/mm² (laboratory value) · 17.4 N/mm² (practical value) |
| Flexural strength | 11.5 N/mm² (laboratory value) · 6.9 N/mm² (practical value) |
| Static modulus of elasticity | 7500 N/mm² |
| Density of hardened mortar | 1.80 kg/dm³ |
| Water permeability | 7.06 × 10⁻⁴ m/s (at 10% addition volume, approx. 1.5 l/min/m² depending on compaction) |
