Easyfix CS is a custom-made edging restraint for free forms, extremely flexible and adaptable. With folded edges for safety and long anchoring pins for extra stability.
Easyfix CS is extremely flexible and adapts to all shapes in your project: straight lines, smooth curves and irregular routes. You don’t need separate corner pieces and can create any layout directly on site, using one and the same product.
You simply hammer the edging into the ground. You position the adjustable pockets as desired depending on the layout, and the long, highly impact-resistant anchor pins ensure a firm fixing. That way you can work quickly and achieve a neat line.
The folded-over top edge with no sharp edges makes Easyfix CS safe to use: you can walk over it barefoot, making the edging child- and pet-friendly. After installation, the fixings remain largely out of sight for a neat finish.
A user-friendly, flexible steel edging for the neat finishing of paths, terraces, borders and lawns.
Easyfix CS is suitable for all areas where there is no traffic:
Easyfix CS is available in two steel versions, each in a height of 100 or 150 mm:
Depending on the version chosen, the sliding pockets are available in a matching colour (grey or brown).
Easyfix CS is available in two steel versions, each in a height of 100 or 150 mm:
Depending on the version chosen, the sliding pockets are available in a matching colour (grey or brown).
You can install Easyfix CS quickly and easily with a hammer, without any special tools.
Step 1 — Mark out the line
Determine the layout of your edging. Easyfix CS follows both straight lines and smooth curves, so you can shape it freely.
Step 2 — Install the border
Place the Easyfix Border along the line and hammer it into the ground to the desired height.
Step 3 — Position the pockets
Slide the pockets into place at random along the line wherever you need extra anchoring.
Step 4 — Anchor
Drive the long anchoring pins through the pockets into the ground for a solid, impact-resistant fixing.
Step 5 — Finish
Finish off the adjoining surfaces. Thanks to the folded top edge and the minimally visible fixing, you get a neat, safe finish.
Easyfix CS is available in galvanised and corten steel, each in heights of 100 or 150 mm. The tables below show the general specifications and the dimensions per version.
Easyfix CS consists of three components that together form a complete installation:
Per pack you get 6 edgings of 240 cm, 18 pockets and 18 anchoring pins, together providing almost 15 linear metres of edging restraint.
| Property | Value |
|---|---|
| Material | Galvanised steel (0.8 mm) and Corten steel (1 mm) |
| Length | 240 cm |
| Heights | 100 mm of 150 mm |
| Height anchor pins | 34 cm |
| Parts | 6 cutouts, 18 pockets, 18 anchor pins |
| Yield per pack | Approximately 15 linear metres |
| Application | Zones where driving is not permitted |
| Top edge | Bent, with no sharp edges |
| Colour pockets | Grey or brown |
You can shorten the Easyfix with a cutting disc (cut at an angle). To make a corner, cut fully through the folded edges, lightly score the border itself, and then you can manually bend the border into a 90° angle.
The RAL colour used is 9005 (jet black).