Metalflex is the lightweight edging in galvanised L-shape, ideal in combination with ECCOgravel. The top layer of the gravel stabilisation is level with the raised side, making the edging virtually invisible.
The Metalflex is extremely suitable in combination with ECCOgravel. The top layer of your gravel stabilisation sits level with the raised edge of the Metalflex, keeping the visible parts to a minimum. Metalflex 45 matches ECCOgravel 30, Metalflex 60 matches ECCOgravel 40.
The L-shaped base is fitted with cut-outs, so the edging follows your route perfectly. Suitable for right angles and sweeping curves, without needing any special equipment.
Metalflex is lightweight and can be installed quickly and easily with a hammer and the supplied installation materials. The bent-over top edge ensures optimum safety during installation and use; the L-shaped base also makes the edging very stable.
A lightweight, flexible galvanised edging for a subtle finish to soft and paved surfaces.
ECCOborder Metalflex is suitable for soft and hard surfaces, and is especially ideal for gravel surfacing:
Step 1 - Determine the layout
Determine the course of the edging using a tape measure and a string line. This forms the basis for accurate placement.
Step 2 - Bend the shape (if applicable)
This step is only needed for curved lines. Carefully bend the Metalflex into the desired shape; the cut-outs in the L-shaped base allow the edging to follow the layout.
Step 3 - Install the edging
Place the edging along the marked-out layout. Secure it in the ground by hammering the supplied nails into the base of the L-shape.
Step 4 - Connect
Connect the edging sections to each other using the supplied bolt and nut.
Optional - Extra reinforcement
For applications with heavier loads, such as along the side of a driveway, we recommend reinforcing the edging further by setting it in concrete.
Metalflex is made from galvanised steel with an L-shaped base and is supplied in lengths of 240 cm.
Each pack contains the necessary fixing materials:
Below you will find the main specifications.
| Property | Value |
|---|---|
| Material | Galvanised steel |
| Form | L-profile |
| Length | 240 cm |
| Thickness | 1 mm |
| Heights | 4.5 cm, 6 cm, 8 cm and 10 cm |
| Package contents | 5 supports, 15 stakes, 5 bolts and 5 nuts |
| Length stakes | 24 cm |
| Thickness stakes | 7 mm |
| Top edge | Bent, for optimum safety |
The Metalflex is ideal for public spaces thanks to the high quality of the material. The Metalflex is made from galvanised steel and therefore has a long service life. The Metalflex is ideal for soft and hard surfaces such as asphalt, loose gravel, paving stones, tiles…