• Rust-brown metal angle profile on a white background
  • Rusty metal beam on grey pebbles
  • Rusty metal container with dry grass in it on a grey surface

Betotop Special is a self-clamping corten steel profile that finishes and protects concrete kerbstones and has a longer visible side of 20 cm. For a high-quality corten steel finish for your kerbstone.

  • Rusty metal container with dry grass in it on a grey surface

    Designed for high concrete kerbs

    The Betotop Special fits concrete edging with a top width of 6 cm and a visible side of 20 cm. It’s precisely this high visible side that you can finish off completely and neatly with this profile, where a standard profile falls short.

  • Roestbruine metalen L-profielbalk op witte achtergrond

    Self-clamping, quick to install

    The profile is self-clamping: you slide it over the kerb edge and it stays firmly in place, without being able to shift. If you want extra reassurance, you can secure the profile to the kerb edge with a bit of cement. That way, you can install it quickly and easily, even on larger building sites.

  • Rusty metal strip between two types of white and grey pebbles

    Protects the concrete and lasts a long time

    The high-quality corten steel has a long lifespan and at the same time protects the concrete kerb from damage, meaning it lasts longer too. Over time, corten steel develops a natural rust-brown colour.

The benefits of Betotop Special

A high-quality corten steel profile to finish high concrete kerbs quickly and neatly.

  • Specially designed for concrete edging with a 6 cm top width and a 20 cm visible face
  • Suitable for both new projects and existing kerbs
  • Self-adhesive: won’t shift anymore after installation
  • Optionally secure further with some cement
  • Captures height differences between concrete kerbs
  • Simple and quick installation
  • Protects the concrete kerb and extends its lifespan
  • Long service life thanks to high-quality Corten steel
  • Protective film against scratches, easy to remove
Applications

What do I use Betotop Special for?

Betotop Special provides a tight finish for high concrete kerbs (top width 6 cm, visible face 20 cm), where the large visible face reveals every unevenness:

  • Public works: finishing high concrete kerbs along roads, squares and car parks, where the large visible face makes every colour and height difference visible.
  • Gardens: a well-kept edging where higher kerbs take up a level difference.
  • Walking and cycling paths: a neat edge finish of raised kerbs along paths.
  • Terraces: an aesthetic finish of high edges around raised terraces.
  • Driveways and car parks: a clean, protective finish of raised kerbs that separate the roadway from adjacent areas. 
  • Jeu de boules pitches: a sturdy, tidy border with a high visible face.
  • Betotop Special tuinafrastering

How do you install Betotop Special?

Step 1 - Preparation

Clear the top and sides of the concrete kerb of dirt so that the profile fits properly.

Step 2 - Remove protective film

Remove the protective film from the Betotop Special profile. It’s quick and saves time on site.

Step 3 - Fit the profile

Slide the U-profile over the concrete kerb. Thanks to the self-clamping shape, the profile is fixed in place immediately and won’t shift.

Step 4 - Anchor if required

If you want extra security, you can fix the profile to the kerb with a bit of cement.

Step 5 - Align and finish

Align the successive profiles with each other; any height differences are compensated for by the length of the profile. Finish the corners and joints neatly for a continuous corten steel edge.

Technical specifications Betotop Special

Betotop Special is a U-profile made of 1 mm corten steel, designed for concrete edging with a top width of 6 cm and a visible face of 20 cm. The tables below provide the general specifications and the dimensions within the Betotop range.

Download the technical data sheet
Property Value
Type U-profile
Material Corten steel
Material thickness 1 mm
Length 200 cm
Dimensions 200 x 6 x (6 + 20) cm
Suitable for New projects and existing kerbstones
Colour Corten steel (rust brown)
Confirmation Self-locking, optional with cement
Package contents 10 pieces per pack (20 m)
FAQ

Frequently asked questions

  • Can I weld the corners of the corten steel Betotop?

    That’s possible, but not necessary. Mitre-cut the corners with a cutting disc — that way they’ll fit together neatly without welding. If you do want to weld, use the correct type of steel.