• Rust-brown metal angle profile on a white background
  • Rusty metal beam on grey pebbles
  • Rusty metal container with dry grass in it on a grey surface

Betotop Special is a self-clamping Corten steel profile that finishes and protects concrete kerbstones and has a longer visible face of 20 cm. For a high-quality Corten steel finish to your kerbstone.

  • Rusty metal container with dry grass in it on a grey surface

    Designed for high concrete kerbs

    The Betotop Special fits concrete edging blocks with a top width of 6 cm and a visible face of 20 cm. It’s precisely this tall visible face that you can finish off completely and neatly with this profile, where a standard profile falls short.

  • Roestbruine metalen L-profielbalk op witte achtergrond

    Self-clamping, quick to install

    The profile is self-clamping: you slide it over the kerb edge and it stays in place, without being able to shift. If you want extra security, you can fix the profile to the kerb edge with a bit of cement. This way you can install it quickly and easily, even on larger building sites.

  • Rusty metal strip between two types of white and grey pebbles

    Protects the concrete and lasts a long time

    The high-quality Corten steel has a long service life and at the same time protects the concrete kerb from damage, so it also lasts longer. Over time, Corten steel develops a natural rust-brown colour.

The benefits of Betotop Special

A high-quality corten steel profile for finishing high concrete kerbs quickly and neatly. 

  • Specially designed for concrete kerbs with a 6 cm top width and a 20 cm visible face
  • Suitable for both new projects and existing kerbs
  • Self-adhesive: won’t shift after installation
  • Optional: secure additionally with some cement
  • Captures height differences between concrete kerbs on
  • Simple and quick installation
  • Protects the concrete kerb and extends its lifespan
  • Long service life thanks to high-quality Corten steel
  • Protective film against scratches, easy to remove
Applications

What do I use Betotop Special for?

Betotop Special provides a neat finish for high concrete edging (top width 6 cm, visible face 20 cm), where the large visible face reveals every imperfection: 

  • Public works: finishing high concrete edging along roads, squares and car parks, where the large visible face makes every colour and height difference visible. 
  • Gardens: a well-kept border where higher kerbs accommodate a difference in level. 
  • Footpaths and cycle paths: a tidy edge finish of raised kerbs along paths. 
  • Terraces: an aesthetic finish of high edges around raised terraces. 
  • Driveways and car parks: a sleek, protective finish of raised kerbs that separate the carriageway from adjacent areas. 
  • Boules courts: a sturdy, neat surround with a high visible face.
  • Betotop Special garden edging

How do you apply Betotop Special?

Step 1 - Preparation

Clear dirt from the top and sides of the concrete kerb so that the profile fits properly.

Step 2 - Remove protective film

Remove the protective film from the Betotop Special profile. It’s quick and saves time on site.

Step 3 - Position the profile

Slide the U-profile over the concrete kerb. Thanks to its self-clamping shape, the profile is immediately secured and will no longer shift.

Step 4 - Anchor if required

If you want extra reassurance, you can fix the profile to the kerb with a little cement.

Step 5 - Align and finish

Align the consecutive profiles with each other; any differences in height are taken up by the length of the profile. Finish the corners and joints neatly for a continuous corten steel edge.

Technical specifications Betotop Special

Betotop Special is a U-profile made of 1 mm corten steel, designed for concrete edging with a top width of 6 cm and a visible face of 20 cm. The tables below provide the general specifications and dimensions within the Betotop range. 

Download the technical data sheet
Property Value
Type U-profile
Material Corten steel
Material thickness 1 mm
Length 200 cm
Dimensions 200 x 6 x (6 + 20) cm
Suitable for New projects and existing kerbstones
Colour Corten steel (rust brown)
Confirmation Self-adhesive, optionally with cement
Package contents 10 pieces per pack (20 m)
FAQ

Frequently asked questions

  • Can I weld the corners of the Corten steel Betotop?

    That’s possible, but not necessary. Mitre the corners with a cutting disc — that way they fit together nicely without welding. If you do want to weld, use the correct type of steel.