Easyfix CS is a bespoke edging restraint for free-form shapes, extremely flexible and adaptable. With turned edges for safety and long anchoring pins for extra stability.
Easyfix CS is extremely flexible and adapts to every shape in your project: straight lines, smooth curves and irregular routes. You don’t need separate corner pieces and can create any layout directly on the construction site, with one and the same product.
You can easily hammer the edging into the ground. Position the movable pockets as required, depending on the layout, and the long, highly impact-resistant anchoring pins ensure a firm fixing. This way you can work quickly and achieve a neat line.
The curved top edge without sharp edges makes Easyfix CS safe to use: you can walk over it barefoot, making the edge finish child- and pet-friendly. After installation, the fastening material largely remains out of sight for a neat finish.
A user-friendly, flexible steel edging for the neat finishing of paths, patios, borders and lawns.
Easyfix CS is suitable for all areas where it is not driven on:
Easyfix CS is available in two steel versions, each in a height of 100 or 150 mm:
Depending on the version selected, the sliding pockets are available in a matching colour (grey or brown).
Easyfix CS is available in two steel versions, each in a height of 100 or 150 mm:
Depending on the version selected, the sliding pockets are available in a matching colour (grey or brown).
You can install Easyfix CS quickly and easily with a hammer, without special tools.
Step 1 — Mark out the line
Determine the line of your edging. Easyfix CS follows both straight lines and smooth curves, so you can shape it freely.
Step 2 — Install the edging
Place the Easyfix Border along the line and drive it into the ground with a hammer to the desired height.
Step 3 — Position the pockets
Slide the pockets into position, at random along the line, where you need extra anchoring.
Step 4 — Anchor
Drive the long anchoring pins through the pockets into the ground for a firm, impact-resistant fixing.
Step 5 — Finish
Finish the adjoining surfaces. The folded top edge and the minimally visible fixing give you a neat, safe finish.
Easyfix CS is available in galvanised and corten steel, each in heights of 100 or 150 mm. The tables below provide the general specifications and the dimensions per version.
Easyfix CS consists of three components which together form a complete installation:
Per pack you get 6 edgings of 240 cm, 18 pockets and 18 anchoring pins, together good for almost 15 linear metres of edging restraint.
| Property | Value |
|---|---|
| Material | Galvanised steel (0.8 mm) and corten steel (1 mm) |
| Length | 240 cm |
| Heights | 100 mm of 150 mm |
| Height anchoring pins | 34 cm |
| Parts | 6 covers, 18 pockets, 18 anchoring pins |
| Yield per pack | Approximately 15 linear metres |
| Application | Zones where driving is not permitted |
| Top edge | Bent, with no sharp edges |
| Coloured pockets | Grey or brown |
You can shorten the Easyfix using a cutting disc (mitre cut). To make a corner, cut right through the folded edges, lightly score the edging itself, and then you can manually bend the edging to a 90° angle.
The RAL colour used is 9005 (jet black).