Easyfix LI is a linear steel edging for straight lines and corners, and gently curved shapes. With turned-over edges for safety and long anchoring pins for added stability.

  • Zwarte metalen rand met witte steentjes langs grijze terrastegels, laag perspectief

    Clean lines, but also gentle curves and right angles

    Easyfix LI is designed for straight lines, but also follows slight curves and right angles. Ideal for neatly edging lawns, paths and patios. You can create any linear layout with one and the same product, without separate corner pieces.

  • Groen gazon met rand van donkergrijze kasseien op de voorgrond

    Quickly installed with just a hammer

    You simply tap the edge trim into place with a hammer. You position the sliding pockets wherever you like depending on the route, and the long anchoring pins with high impact resistance ensure a secure fixing. This way you can work quickly and deliver a neat line. 

  • Safe to use thanks to the folded-over top edge

    The bent-over top edge with no sharp edges makes Easyfix LI safe to use: you can walk over it barefoot, making the edging child- and pet-friendly. After installation, the fixing material largely remains out of sight for a neat finish. 

The benefits of Easyfix LI

A user-friendly steel edging for the sleek, linear finish of paths, terraces, borders and lawns.

  • To be used in straight lines, gentle waves and right angles
  • Quick and easy to install with a hammer
  • Available in corten steel (rust-coloured), galvanised (grey) and black powder-coated (on request)
  • Rolled top edge for optimal safety, with no sharp edges
  • Child- and pet-friendly: can be walked on barefoot
  • Randomly positioned anchoring depending on the route alignment
  • Long anchoring pins with high impact resistance for extra stability
  • Fixings only partially visible after installation
  • Available in 2 heights (100 and 150 mm)
FINISHING

Available in 3 versions and 2 heights

Easyfix LI is available in three steel finishes, each with a height of 100 or 150 mm: 

  • corten steel (1 mm)
  • galvanised (0.8 mm) 
  • black powder coating (on request)

Depending on the chosen finish, the sliding pockets are available in a matching colour (grey or brown).

Two long trim boards, one white and one brown, on a white background
FINISHING

Available in 3 versions and 2 heights

Easyfix LI is available in three steel finishes, each with a height of 100 or 150 mm: 

  • corten steel (1 mm)
  • galvanised (0.8 mm) 
  • black powder coating (on request)

Depending on the chosen finish, the sliding pockets are available in a matching colour (grey or brown).

How do you install Easyfix LI?

Easyfix LI is quick and easy to install with a hammer, without special tools. Easy as 1, 2, 3.

Step 1 - Set out the line

Determine the line of your edging. Easyfix LI follows straight lines, gentle curves and right angles.

Step 2 - Install the border

Place the Easyfix Border along the line and hammer it into the ground to the desired height.

Step 3 - Position the pockets 

Slide the pockets into place, randomly along the line, where you need extra anchoring.

Step 4 - Anchor

Drive the long anchoring pins through the pockets into the ground for a firm, impact-resistant fixing.

Step 5 - Finish

Finish the adjoining surfaces. Thanks to the folded top edge and the minimally visible fixing, you get a neat, safe finish.

Technical specifications Easyfix LI

Easyfix LI consists of three components that together form a complete installation:

  • Easyfix Border: the edge finishing for straight lines and gentle curves
  • Easyfix Pocket: movable pockets, to be placed as required depending on the route 
  • Easyfix Anchor: long anchoring pins with high impact resistance for a solid fixation

Per pack you get 6 edge finishes of 240 cm, 18 pockets and 18 anchoring pins, together good for almost 15 linear metres of lawn edging.

Property Value
Material Galvanised steel (0.8 mm) and Corten steel (1 mm)
On request Black powder coating
Length 240 cm
Heights 100 mm of 150 mm
Height anchoring pins 34 cm
Parts Border, pockets and anchoring pins
Package contents 6 awning sheets, 18 pockets, 18 anchoring pins
Yield per pack Approximately 15 running metres
Top edge Bent, without sharp edges
Rideable No
Colours pockets Grey or brown
FAQ

Frequently asked questions

  • How do I bend the Easyfix LI into a 90° corner?

    Lightly grind the top and bottom edges of the edging (also called the return). Then bend the edging around a post or sturdy table leg at a 90° angle.

    For very sharp curves that are not a right angle, the Easyfix CS (custom shape) is the most suitable option.

  • How do I best shorten the Easyfix borders and how do I make a corner?

    You can shorten the Easyfix using a cutting disc (mitre cut). To make a corner, cut right through the folded edges, lightly score the edging itself, and then you can manually bend the edging to a 90° angle.

  • Is a 90-degree slope over a 240 cm section feasible with the Easyfix LI 10 cm?

    No. The Easyfix LI isn’t designed for this; use the Easyfix CS instead. If you still try it with the Easyfix LI, you risk an unwanted crease.

  • Is the Easyfix LI available in black with a height of 10 cm or 15 cm?

    Both are available on request in black powder coating.

  • What is the RAL colour of the ECCOborders Easyfix BLACK?

    The RAL colour used is 9005 (jet black).