ECCOborder Flex is a flexible edging on a roll, made from recycled PVC, for straight and curved shapes. With a rounded or flat finishing edge and easy to install with Multiprofile anchoring.
ECCOborder Flex offers excellent value for money and is a budget-friendly alternative to wooden or metal edging. Ideal for edging off larger areas without the material cost going through the roof, with a modern and sleek final result.
The roll lawn edging effortlessly follows sweeping curves and, combined with the Multi Profile anchoring, is also suitable for straight sections. This allows you to seamlessly transition from a curved line into straight edging. You can also choose a rounded or flat finishing edge at the top.
ECCOborder Flex is made from recycled PVC and is, in turn, 100% recyclable. A sustainable choice you can immediately highlight in your communications to environmentally conscious customers. The toothed groove function ensures optimal ease of handling when unrolling and installing.
A flexible, budget-friendly roll of lawn edging for a neat finish to lawns, gravel paths, flower beds and ponds.
ECCOborder Flex is suitable for a wide range of edging applications:
ECCOborder Flex is available on a 25 m roll, in two colours:
Colour and composition may vary slightly due to the use of recycled material.
ECCOborder Flex is available on a 25 m roll, in two colours:
Colour and composition may vary slightly due to the use of recycled material.
Step 1 - Preparation
Dig a trench according to the chosen installation method. ECCOborder Flex is ideally suited to curved shapes, but can also be used for straight sections, provided it is anchored every 80 to 100 cm.
Step 2 - Placement
Place the border at least two thirds into the ground, in the prepared trench. Choose a flat or rounded top edge, depending on the desired result.
Step 3 - Anchoring
Drive the Multi Profile fixing stakes into the ground with a rubber or wooden mallet. The top of the stakes should be about 3 cm lower than the top edge of the border.
Step 4 - Fixing
Fix the border to the Multi Profile stakes with self-drilling countersunk screws (45 mm). Depending on the application, provide an anchor every 80 to 100 cm.
Step 5 - Finishing
Finish both sides of the border with soil, bark or gravel, according to the chosen application.
ECCOborder Flex is made from recycled PVC and is supplied in a 25 m roll. The table below provides the technical specifications.
| Property | Value |
|---|---|
| Material | Recycled PVC, 100% recyclable |
| Colours | Grey or black |
| Height | 14 cm |
| Roll length | 25 m |
| Thickness | 4.5 mm (top and bottom margins 8 mm) |
| Finishing edge | Finished or flat, your choice |
| Confirmation | Multi Profile anchoring, every 80 to 100 cm |
| Recommended screws | Self-drilling, countersunk head, 45 mm |
| Form | Straight and curved shapes |
| Weight | 23.5 kg (per roll) |
It is important to secure a stake every 50 cm to minimise bending. The ECCOborder Flex is also available as a straight panel of 2.40 m. That way, you can be sure to create straight lines.
Firm anchoring for edge restraints in all types of materials.